Premium 300gsm Microfibre Cloths – Pack of 10

#PMC40x40

£9.99

This item is out of stock

These large 40x40cm cloths are a high quality warp knitted microfibre cloth with a high (30%) polyamide content. Manufactured with a high splitting ratio (ultra split) to produce a very soft cloth that is ideal on sensitive surfaces such as Granite, Quartz, Corian & Staron. The hem is produced using the same material content as the cloth, thereby reducing the risk of scratching to almost zero.

Also works very well as a face flannel and will help exfoliate the skin.

It is advisable that the darker colours are laundered separately for the first wash or so as they may leach some dye.

These warp knitted polyamide content cloths ensure almost no surface damage as the splitting process produces a very soft material ideal for use on sensitive surfaces. The high polyamide content improves the cleaning effect over lower priced products.

We recommend that these cloths are laundered at a low temperature around 40C to save energy. They can be laundered at higher temperatures up to 95C however, some shrinkage will occur in the initial few washes (>5%).

Can be laundered over 500 times.

Can be tumble dried, in fact it is beneficial as it ‘opens’ the fibres up.

Fabric softener can be used, however this will reduce the cloths effectiveness when used dry.

To avoid smearing please ensure that the rinse cycle is effective and removes all traces of detergent.

Yarn used is 0.13 Denier 30% polyamide 70% polyester 300gsm Terry Warp Knitted.

Dry

Use dry for removing dust and loose particles from all hard surfaces. As it is wiped over a surface it creates a static charge that attracts dirt to the cloth, the microfibre then ‘holds’ the dirt until the cloth is washed.

Wet

Use damp to remove heavier soilings from all hard surfaces. The cloth works through capillary action, drawing dirt into the cloth.

You Might Also Like